浙江lng三期项目接收站工程计量橇国际招标澄清或变更公告(1)
· 2024-06-20
澄清或变更简要说明：投标截止时间/开标时间自2024年6月26日9：30（北京时间）延期至7月3日9：30（北京时间）。
中化建国际招标有限责任公司受招标人委托对下列产品及服务进行国际公开竞争性招标，于2024-06-20在中国国际招标网发布变更公告。本次招标采用电子招标方式，现邀请合格投标人参加投标。
1、招标条件
项目概况:浙江LNG三期项目接收站工程计量橇
资金到位或资金来源落实情况:已落实
项目已具备招标条件的说明:已具备
2、招标内容
招标项目编号:0704-2440JDCP6115
招标项目名称:浙江LNG三期项目接收站工程计量橇
项目实施地点:中国浙江省
招标产品列表(主要设备):
3、投标人资格要求
投标人应具备的资格或业绩:对投标人的资格和业绩要求：
Requirements for Qualification and reference of Bidder:
？
（1）资格要求
Requirements for Qualification of Bidder
A．如果投标人为境内注册公司，投标人需提供合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照；
如果投标人为境外注册公司，需提供有效的公司登记注册证明。
A．The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;
The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.
B.本次招标不接受代理商投标。
B. Bid by Agent is not accepted.
C.是否接受联合体投标：否。
C. Joint Venture: Not Accepted.
D.授权要求：
a.如果投标人为超声波流量计制造商，投标人应取得成橇商全球范围内对本项目投标的合法唯一正式授权；授权内应明确投标人在已授权成橇商的工厂内集成计量橇系统。
b.如果投标人为计量橇成橇商，投标人应取得超声波流量计制造商全球范围内对本项目投标的合法唯一正式授权，授权内应明确超声波流量计在投标人的工厂内集成计量橇系统。
c.投标人以自己制造的货物参与投标的，不能再将此货物同时授权给其他供应商参与投标，否则相关的所有投标将被拒绝。
d.投标人将被授权的货物再授权给其他投标人同时参与本项目投标，相关的所有投标将被拒绝。
D. Authorization requirements:
a.If the bidder is a manufacturer of ultrasonic flowmeter, the bidder shall obtain the skidders global legal sole official authorization for this bidding and shall integrate the metering system at the authorized skidders plant in the authorization.
b.If the bidder is a metering skidder, the bidder shall obtain the legal and sole official authorization globally for this bidding from the manufacturer of the ultrasonic flowmeter and shall integrate the authorized ultrasonic flowmeter into the metering system at its plant in the authorization.
c.If a bidder is bidding with their own manufactured goods, they cannot authorize other suppliers to bid at the same time, otherwise all related bids will be rejected.
d.The bidder will authorize the authorized goods to other bidders and bid this project, all related bids will be rejected.
（2）资质要求及证明文件
（2）Requirements for Qualification of bidder and certificate.
① 投标人需同时提供满足以下（一）（二）两项要求的证明文件。
（一）投标人需提供成橇商的特种设备生产许可证（以下a、b两项中满足其一即可）：
a.许可项目为压力管道元件制造，子项目为元件组合装置的中华人民共和国特种设备生产许可证；
b.许可项目为压力容器制造，子项目为固定式压力容器其他高压容器（A2）或大型高压容器（A1）的中华人民共和国特种设备生产许可证。
（二）投标人需提供超声波流量计制造商的中华人民共和国计量器具型式批准证书，型式批准产地必须与流量计产地一致。
1.The bidder must provide the following valid qualification certificates:
(I) The license shall meet either of the following two items:
a. The licenses permit item is manufacture of pressure piping components. The licenses permit sub-item is Component combination device;
b. The licenses permit item is pressure vessel fabrication in manufacture license of special equipment, The licenses permit sub-item is fixed pressure vessel of the other high-pressure vessel(A2), or large and high pressure vessel(A1).
(II) Bidder shall provide Ultrasonic Flowmeter Manufacturers License. Ultrasonic flowmeter manufacturer needs to have PATTERN APPROVAL CERTIFICATE OF THE MEASURING INSTRUMENTS OF THE PRC. The Origin of Instruments must be same with the flowmeters origin.
（3）业绩要求
（3）Requirement for Bidders reference
投标人同时满足以下三项业绩情况：
The bidder shall meet all of the following three conditions:
业绩要求（一）
投标人自2009年1月1日至投标截止之日（以到货验收证明材料时间为准），在中国境内具有一个合同的用于天然气计量的计量橇供货业绩，且同时满足以下要求：
1)至少有一条计量回路磅级不小于1500LB；
2)至少有一条计量管路尺寸不小于12寸。
3)合同中所用流量计的计量器具型式试验批准证书的型式注册表的准确度不高于1.0%。
投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括但不限于：1）销售合同扫描件和2）到货验收材料。所提交的业绩证明文件必须至少体现以下内容：合同签署页（卖方为本次投标人）、货物名称、到货验收材料签署时间、流量计的计量器具型式试验批准证书的型式注册表、超声波流量计仪表数据表、主要技术参数（计量介质、磅级、尺寸）及到货验收材料（能够证明主体货物到货验收合格）。未提交业绩证明文件，或所提供的业绩证明文件无法体现要求的内容的，均视为无效业绩。
业绩认定时间：以到货验收证明材料时间为准。到货验收证明材料有多个签字或盖章时间的，以最晚签字或盖章时间为准。
Performance requirements (i)
The bidder shall have at least one performance record of supplying natural gas trade metering system for metering trade in China from January 1, 2009 to the deadline of this Bid (subject to the time of arrival acceptance). The performance record shall meet both of the following requirements:
1)The pressure is not less than 1500LB in the system;
2)The size of metering pipe is not less than 12 inches in the system.
3)The accuracy of the type registration form for the type test approval certificate of the measuring instrument for the flowmeter used in the contract is not higher than 1.0%.
The bidder shall submit the performance list as the specified format, and submit the relevant performance proof documents. Performance proof documents include but are not limited to: 1) Scanned copy of sales contract (including relevant technical attachments) and 2) Arrival acceptance materials. The performance proof documents submitted must at least reflect the following contents: contract signing time, project name,goods name, arrival acceptance materials signing time, main technical parameters (including medium,poundage, size),the type test approval certificate of the measuring instrument and arrival acceptance documents (to demonstrate that the subject goods has arrived and has been accepted),Ultrasonic flow meter instrument data sheet. Failure to submit performance documentation, or the provided performance documentation does not reflect the required content, shall be regarded as invalid performance.
Performance time: the date of acceptance certificate file shall prevail. If there are multiple signature or seal times for the arrival acceptance certificate file, the latest signature or seal time shall prevail.
业绩要求（二）
投标人所投标的计量橇内的气体超声波流量计制造商自2009年1月1日至投标截止之日（以到货验收证明材料时间为准），在中国境内具有一个合同的用于天然气计量设备的超声波流量计的供货业绩，且同时满足以下要求：
1)合同中至少有一台超声波流量计的计量回路磅级不小于1500LB；
2)合同中至少有一台超声波流量计的计量管路尺寸不小于12寸。
3)合同中所用流量计的计量器具型式试验批准证书的型式注册表的准确度不高于1.0%。
投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括但不限于：1）销售合同扫描件和2）到货验收材料。所提交的业绩证明文件必须至少体现以下内容：合同签署页（应有双方盖章）、超声波流量计制造商名称、货物名称、到货验收材料签署时间、流量计的计量器具型式试验批准证书的型式注册表、超声波流量计仪表数据表、主要技术参数（计量介质、磅级、尺寸）及到货验收材料。未提交业绩证明文件，或所提供的业绩证明文件无法体现要求的内容的，均视为无效业绩。
业绩认定时间：以到货验收证明材料时间为准，到货验收证明材料有多个签字或盖章时间的，以最晚签字或盖章时间为准。
Performance requirements (ii)
There is at least one record by The Ultrasonic flowmeter supplier who supplied ultrasonic flowmeter for natural gas metering trade in China from January 1, 2009 to the deadline of this Bid (subject to the time of arrival acceptance) at least, the record shall meet both of the following requirements:
1)The pressure is not less than 1500LB in the record;
2)The size of metering pipe is not less than 12 inches in the record.
3)The accuracy of the type registration form for the type test approval certificate of the measuring instrument for the flowmeter used in the contract is not higher than 1.0%.
The bidder shall submit the performance list as the specified format, and submit the relevant performance proof documents. Performance proof documents include but are not limited to: 1) Scanned copy of sales contract (including relevant technical attachments) and 2) Arrival acceptance materials. The performance proof documents submitted must at least reflect the following contents: contract signing time, project name, manufacturers name of the Ultrasonic flowmeter supplier, goods name, arrival acceptance materials signing time, main technical parameters (including medium, poundage, size) ,the type test approval certificate of the measuring instrument and arrival acceptance materials (ability to demonstrate that the subject goods have arrived and passed acceptance),Ultrasonic flow meter instrument data sheet. Failure to submit performance documentation, or the performance documentation provided cannot reflect the required content, shall be regarded as invalid performance.
Performance time: the date of acceptance certificate files shall prevail. If there are multiple signature or seal times for the arrival acceptance certificate files, the latest signature or seal time shall prevail.
业绩要求（三）
投标人所投标的计量橇内的强制密封球阀的制造商自2009年1月1日至投标截止之日（以到货验收证明材料时间为准），在中国境内具有一个合同的用于天然气计量设备的强制密封球阀供货业绩，且同时满足以下要求：
1)合同中至少有一台强制密封球阀的磅级不小于1500LB；
2)合同中至少有一台强制密封球阀的执行机构驱动形式为气动；
3)合同中至少有一台强制密封球阀的尺寸不小于12寸。
4)合同中所用流量计的计量器具型式试验批准证书的型式注册表的准确度不高于1.0%。
投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括但不限于：1）销售合同扫描件和2）到货验收材料。所提交的业绩证明文件必须至少体现以下内容：合同签署页（应有双方盖章）、强制密封球阀的制造商名称、货物名称、主要技术参数（计量介质、磅级、尺寸，动力形式）、流量计的计量器具型式试验批准证书的型式注册表、超声波流量计仪表数据表、到货验收材料签署时间及到货验收材料。未提交业绩证明文件，或所提供的业绩证明文件无法体现要求的内容的，均视为无效业绩。
业绩认定时间：以到货验收证明材料时间为准，到货验收证明材料有多个签字或盖章时间的，以最晚签字或盖章时间为准。
Performance requirements (iii)
There is at least one record by the supplier who supplied the forced sealing ball valves for natural gas trade in China from January 1, 2009 to the deadline of the tender (subject to the time of arrival acceptance) at least, the record shall meet all of the following requirements:
1)The pressure of the forced sealing ball is not less than 1500LB in the record;
2)The sealing power of the ball valve is pneumatic in the record;
3)The size of metering pipe is not less than 12 inches in the record.
4)The accuracy of the type registration form for the type test approval certificate of the measuring instrument for the flowmeter used in the contract is not higher than 1.0%.
The bidder shall submit the performance list as the specified format, and submit the relevant performance proof documents. Performance proof documents include but are not limited to: 1) Scanned copy of sales contract (including relevant technical attachments) and 2) Arrival acceptance materials. The performance proof documents submitted must at least reflect the following contents: contract signing time, project name, manufacturers name, goods name, arrival acceptance materials signing time, main technical parameters (including medium,poundage, size) ,the type test approval certificate of the measuring instrument and arrival acceptance materials (ability to demonstrate that the subject goods have arrived and passed acceptance),Ultrasonic flow meter instrument data sheet. Failure to submit performance documentation, or the performance documentation provided cannot reflect the required content, shall be regarded as invalid performance.
Performance recognition time: the date of qualified materials receipt shall prevail. If there are multiple signature or seal times for the arrival acceptance certificate materials, the latest signature or seal time shall prevail.
（4）其他要求
1.制造商应通过GB/T19001（ISO9001）质量体系认证证书、GB/T24001（ISO14001）环境管理体系认证证书、B/T28001(OHSAS18001)或GB/T45001 (ISO45001) 职业健康管理体系认证证书，投标人须同时提供制造商有效的GB/T19001（ISO9001）质量体系认证证书、GB/T24001（ISO14001）环境管理体系认证证书、B/T28001(OHSAS18001)或GB/T45001 (ISO45001) 职业健康管理体系认证证书。
Other requirements
1.manufacturer should own GB/T19001 (ISO9001) quality system certification, GB/T24001 (ISO14001) environmental management system certification, B/T28001 (OHSAS18001) or GB/T45001 (ISO45001) occupational health management system certification.Bidders must also provide valid manufacturers GB/T19001 (ISO9001) quality system certification, GB/T24001 (ISO14001) environmental management system certification, B/T28001 (OHSAS18001) or GB/T45001 (ISO45001) occupational health management system certification and can be verified on the website of the China Certification and Accreditation Administration (http://www.cnca.gov.cn/). If there is the latest system standard issued by the relevant state departments, the latest system standard shall prevail.
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
4、招标文件的获取
招标文件领购开始时间:2024-06-05
招标文件领购结束时间:2024-06-13
是否在线售卖标书:否
获取招标文件方式:现场领购
招标文件领购地点：https://buy.cnooc.com.cn
招标文件售价:￥200/$35
其他说明:投标人获取招标文件后需登录机电产品招标投标交易平台办理CA锁CA锁便于用来线上投标时使用，咨询全流程操作电话：4000606000-1。
After obtaining the bidding documents, the？bidder shall log on？the？trading platform of bidding and tendering for mechanical？and？electrical？products to handle the CA lock, which is？convenient for online？bidding.For？consultation, the whole process can be operated by 4000606000-1.？
5、投标文件的递交
投标截止时间（开标时间）:2024-07-03 09:30
投标文件送达地点:必联网（http://www.ebnew.com）或机电产品招标投标电子交易平台（http://www.chinabidding.com）
开标地点:必联网（http://www.ebnew.com）或机电产品招标投标电子交易平台（http://www.chinabidding.com）
6、联系方式
招标人:中海油绿能港浙江宁波能源有限公司
地址:中国浙江省宁波市北仑区郭巨街道白中线峙北段368号
联系人:孙林
联系方式:+86-13055967557
招标代理机构:中化建国际招标有限责任公司
地址:北京市东城区东直门外小街6号海油大厦4层
联系人:王燕
联系方式:+86 010-84527979
7、汇款方式:
招标代理机构开户银行(人民币):
招标代理机构开户银行(美元):
账号(人民币):
账号(美元):
中化建国际招标有限责任公司受招标人委托对下列产品及服务进行国际公开竞争性招标，于2024-06-20在中国国际招标网发布变更公告。本次招标采用电子招标方式，现邀请合格投标人参加投标。
1、招标条件
项目概况:浙江LNG三期项目接收站工程计量橇
资金到位或资金来源落实情况:已落实
项目已具备招标条件的说明:已具备
2、招标内容
招标项目编号:0704-2440JDCP6115
招标项目名称:浙江LNG三期项目接收站工程计量橇
项目实施地点:中国浙江省
招标产品列表(主要设备):
| 序号 | 产品名称 | 数量 | 简要技术规格 | 备注 |
| 1 | 计量橇 | 1套 | 详见招标文件 | 无 |
3、投标人资格要求
投标人应具备的资格或业绩:对投标人的资格和业绩要求：
Requirements for Qualification and reference of Bidder:
？
（1）资格要求
Requirements for Qualification of Bidder
A．如果投标人为境内注册公司，投标人需提供合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照；
如果投标人为境外注册公司，需提供有效的公司登记注册证明。
A．The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;
The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.
B.本次招标不接受代理商投标。
B. Bid by Agent is not accepted.
C.是否接受联合体投标：否。
C. Joint Venture: Not Accepted.
D.授权要求：
a.如果投标人为超声波流量计制造商，投标人应取得成橇商全球范围内对本项目投标的合法唯一正式授权；授权内应明确投标人在已授权成橇商的工厂内集成计量橇系统。
b.如果投标人为计量橇成橇商，投标人应取得超声波流量计制造商全球范围内对本项目投标的合法唯一正式授权，授权内应明确超声波流量计在投标人的工厂内集成计量橇系统。
c.投标人以自己制造的货物参与投标的，不能再将此货物同时授权给其他供应商参与投标，否则相关的所有投标将被拒绝。
d.投标人将被授权的货物再授权给其他投标人同时参与本项目投标，相关的所有投标将被拒绝。
D. Authorization requirements:
a.If the bidder is a manufacturer of ultrasonic flowmeter, the bidder shall obtain the skidders global legal sole official authorization for this bidding and shall integrate the metering system at the authorized skidders plant in the authorization.
b.If the bidder is a metering skidder, the bidder shall obtain the legal and sole official authorization globally for this bidding from the manufacturer of the ultrasonic flowmeter and shall integrate the authorized ultrasonic flowmeter into the metering system at its plant in the authorization.
c.If a bidder is bidding with their own manufactured goods, they cannot authorize other suppliers to bid at the same time, otherwise all related bids will be rejected.
d.The bidder will authorize the authorized goods to other bidders and bid this project, all related bids will be rejected.
（2）资质要求及证明文件
（2）Requirements for Qualification of bidder and certificate.
① 投标人需同时提供满足以下（一）（二）两项要求的证明文件。
（一）投标人需提供成橇商的特种设备生产许可证（以下a、b两项中满足其一即可）：
a.许可项目为压力管道元件制造，子项目为元件组合装置的中华人民共和国特种设备生产许可证；
b.许可项目为压力容器制造，子项目为固定式压力容器其他高压容器（A2）或大型高压容器（A1）的中华人民共和国特种设备生产许可证。
（二）投标人需提供超声波流量计制造商的中华人民共和国计量器具型式批准证书，型式批准产地必须与流量计产地一致。
1.The bidder must provide the following valid qualification certificates:
(I) The license shall meet either of the following two items:
a. The licenses permit item is manufacture of pressure piping components. The licenses permit sub-item is Component combination device;
b. The licenses permit item is pressure vessel fabrication in manufacture license of special equipment, The licenses permit sub-item is fixed pressure vessel of the other high-pressure vessel(A2), or large and high pressure vessel(A1).
(II) Bidder shall provide Ultrasonic Flowmeter Manufacturers License. Ultrasonic flowmeter manufacturer needs to have PATTERN APPROVAL CERTIFICATE OF THE MEASURING INSTRUMENTS OF THE PRC. The Origin of Instruments must be same with the flowmeters origin.
（3）业绩要求
（3）Requirement for Bidders reference
投标人同时满足以下三项业绩情况：
The bidder shall meet all of the following three conditions:
业绩要求（一）
投标人自2009年1月1日至投标截止之日（以到货验收证明材料时间为准），在中国境内具有一个合同的用于天然气计量的计量橇供货业绩，且同时满足以下要求：
1)至少有一条计量回路磅级不小于1500LB；
2)至少有一条计量管路尺寸不小于12寸。
3)合同中所用流量计的计量器具型式试验批准证书的型式注册表的准确度不高于1.0%。
投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括但不限于：1）销售合同扫描件和2）到货验收材料。所提交的业绩证明文件必须至少体现以下内容：合同签署页（卖方为本次投标人）、货物名称、到货验收材料签署时间、流量计的计量器具型式试验批准证书的型式注册表、超声波流量计仪表数据表、主要技术参数（计量介质、磅级、尺寸）及到货验收材料（能够证明主体货物到货验收合格）。未提交业绩证明文件，或所提供的业绩证明文件无法体现要求的内容的，均视为无效业绩。
业绩认定时间：以到货验收证明材料时间为准。到货验收证明材料有多个签字或盖章时间的，以最晚签字或盖章时间为准。
Performance requirements (i)
The bidder shall have at least one performance record of supplying natural gas trade metering system for metering trade in China from January 1, 2009 to the deadline of this Bid (subject to the time of arrival acceptance). The performance record shall meet both of the following requirements:
1)The pressure is not less than 1500LB in the system;
2)The size of metering pipe is not less than 12 inches in the system.
3)The accuracy of the type registration form for the type test approval certificate of the measuring instrument for the flowmeter used in the contract is not higher than 1.0%.
The bidder shall submit the performance list as the specified format, and submit the relevant performance proof documents. Performance proof documents include but are not limited to: 1) Scanned copy of sales contract (including relevant technical attachments) and 2) Arrival acceptance materials. The performance proof documents submitted must at least reflect the following contents: contract signing time, project name,goods name, arrival acceptance materials signing time, main technical parameters (including medium,poundage, size),the type test approval certificate of the measuring instrument and arrival acceptance documents (to demonstrate that the subject goods has arrived and has been accepted),Ultrasonic flow meter instrument data sheet. Failure to submit performance documentation, or the provided performance documentation does not reflect the required content, shall be regarded as invalid performance.
Performance time: the date of acceptance certificate file shall prevail. If there are multiple signature or seal times for the arrival acceptance certificate file, the latest signature or seal time shall prevail.
业绩要求（二）
投标人所投标的计量橇内的气体超声波流量计制造商自2009年1月1日至投标截止之日（以到货验收证明材料时间为准），在中国境内具有一个合同的用于天然气计量设备的超声波流量计的供货业绩，且同时满足以下要求：
1)合同中至少有一台超声波流量计的计量回路磅级不小于1500LB；
2)合同中至少有一台超声波流量计的计量管路尺寸不小于12寸。
3)合同中所用流量计的计量器具型式试验批准证书的型式注册表的准确度不高于1.0%。
投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括但不限于：1）销售合同扫描件和2）到货验收材料。所提交的业绩证明文件必须至少体现以下内容：合同签署页（应有双方盖章）、超声波流量计制造商名称、货物名称、到货验收材料签署时间、流量计的计量器具型式试验批准证书的型式注册表、超声波流量计仪表数据表、主要技术参数（计量介质、磅级、尺寸）及到货验收材料。未提交业绩证明文件，或所提供的业绩证明文件无法体现要求的内容的，均视为无效业绩。
业绩认定时间：以到货验收证明材料时间为准，到货验收证明材料有多个签字或盖章时间的，以最晚签字或盖章时间为准。
Performance requirements (ii)
There is at least one record by The Ultrasonic flowmeter supplier who supplied ultrasonic flowmeter for natural gas metering trade in China from January 1, 2009 to the deadline of this Bid (subject to the time of arrival acceptance) at least, the record shall meet both of the following requirements:
1)The pressure is not less than 1500LB in the record;
2)The size of metering pipe is not less than 12 inches in the record.
3)The accuracy of the type registration form for the type test approval certificate of the measuring instrument for the flowmeter used in the contract is not higher than 1.0%.
The bidder shall submit the performance list as the specified format, and submit the relevant performance proof documents. Performance proof documents include but are not limited to: 1) Scanned copy of sales contract (including relevant technical attachments) and 2) Arrival acceptance materials. The performance proof documents submitted must at least reflect the following contents: contract signing time, project name, manufacturers name of the Ultrasonic flowmeter supplier, goods name, arrival acceptance materials signing time, main technical parameters (including medium, poundage, size) ,the type test approval certificate of the measuring instrument and arrival acceptance materials (ability to demonstrate that the subject goods have arrived and passed acceptance),Ultrasonic flow meter instrument data sheet. Failure to submit performance documentation, or the performance documentation provided cannot reflect the required content, shall be regarded as invalid performance.
Performance time: the date of acceptance certificate files shall prevail. If there are multiple signature or seal times for the arrival acceptance certificate files, the latest signature or seal time shall prevail.
业绩要求（三）
投标人所投标的计量橇内的强制密封球阀的制造商自2009年1月1日至投标截止之日（以到货验收证明材料时间为准），在中国境内具有一个合同的用于天然气计量设备的强制密封球阀供货业绩，且同时满足以下要求：
1)合同中至少有一台强制密封球阀的磅级不小于1500LB；
2)合同中至少有一台强制密封球阀的执行机构驱动形式为气动；
3)合同中至少有一台强制密封球阀的尺寸不小于12寸。
4)合同中所用流量计的计量器具型式试验批准证书的型式注册表的准确度不高于1.0%。
投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括但不限于：1）销售合同扫描件和2）到货验收材料。所提交的业绩证明文件必须至少体现以下内容：合同签署页（应有双方盖章）、强制密封球阀的制造商名称、货物名称、主要技术参数（计量介质、磅级、尺寸，动力形式）、流量计的计量器具型式试验批准证书的型式注册表、超声波流量计仪表数据表、到货验收材料签署时间及到货验收材料。未提交业绩证明文件，或所提供的业绩证明文件无法体现要求的内容的，均视为无效业绩。
业绩认定时间：以到货验收证明材料时间为准，到货验收证明材料有多个签字或盖章时间的，以最晚签字或盖章时间为准。
Performance requirements (iii)
There is at least one record by the supplier who supplied the forced sealing ball valves for natural gas trade in China from January 1, 2009 to the deadline of the tender (subject to the time of arrival acceptance) at least, the record shall meet all of the following requirements:
1)The pressure of the forced sealing ball is not less than 1500LB in the record;
2)The sealing power of the ball valve is pneumatic in the record;
3)The size of metering pipe is not less than 12 inches in the record.
4)The accuracy of the type registration form for the type test approval certificate of the measuring instrument for the flowmeter used in the contract is not higher than 1.0%.
The bidder shall submit the performance list as the specified format, and submit the relevant performance proof documents. Performance proof documents include but are not limited to: 1) Scanned copy of sales contract (including relevant technical attachments) and 2) Arrival acceptance materials. The performance proof documents submitted must at least reflect the following contents: contract signing time, project name, manufacturers name, goods name, arrival acceptance materials signing time, main technical parameters (including medium,poundage, size) ,the type test approval certificate of the measuring instrument and arrival acceptance materials (ability to demonstrate that the subject goods have arrived and passed acceptance),Ultrasonic flow meter instrument data sheet. Failure to submit performance documentation, or the performance documentation provided cannot reflect the required content, shall be regarded as invalid performance.
Performance recognition time: the date of qualified materials receipt shall prevail. If there are multiple signature or seal times for the arrival acceptance certificate materials, the latest signature or seal time shall prevail.
（4）其他要求
1.制造商应通过GB/T19001（ISO9001）质量体系认证证书、GB/T24001（ISO14001）环境管理体系认证证书、B/T28001(OHSAS18001)或GB/T45001 (ISO45001) 职业健康管理体系认证证书，投标人须同时提供制造商有效的GB/T19001（ISO9001）质量体系认证证书、GB/T24001（ISO14001）环境管理体系认证证书、B/T28001(OHSAS18001)或GB/T45001 (ISO45001) 职业健康管理体系认证证书。
Other requirements
1.manufacturer should own GB/T19001 (ISO9001) quality system certification, GB/T24001 (ISO14001) environmental management system certification, B/T28001 (OHSAS18001) or GB/T45001 (ISO45001) occupational health management system certification.Bidders must also provide valid manufacturers GB/T19001 (ISO9001) quality system certification, GB/T24001 (ISO14001) environmental management system certification, B/T28001 (OHSAS18001) or GB/T45001 (ISO45001) occupational health management system certification and can be verified on the website of the China Certification and Accreditation Administration (http://www.cnca.gov.cn/). If there is the latest system standard issued by the relevant state departments, the latest system standard shall prevail.
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
4、招标文件的获取
招标文件领购开始时间:2024-06-05
招标文件领购结束时间:2024-06-13
是否在线售卖标书:否
获取招标文件方式:现场领购
招标文件领购地点：https://buy.cnooc.com.cn
招标文件售价:￥200/$35
其他说明:投标人获取招标文件后需登录机电产品招标投标交易平台办理CA锁CA锁便于用来线上投标时使用，咨询全流程操作电话：4000606000-1。
After obtaining the bidding documents, the？bidder shall log on？the？trading platform of bidding and tendering for mechanical？and？electrical？products to handle the CA lock, which is？convenient for online？bidding.For？consultation, the whole process can be operated by 4000606000-1.？
5、投标文件的递交
投标截止时间（开标时间）:2024-07-03 09:30
投标文件送达地点:必联网（http://www.ebnew.com）或机电产品招标投标电子交易平台（http://www.chinabidding.com）
开标地点:必联网（http://www.ebnew.com）或机电产品招标投标电子交易平台（http://www.chinabidding.com）
6、联系方式
招标人:中海油绿能港浙江宁波能源有限公司
地址:中国浙江省宁波市北仑区郭巨街道白中线峙北段368号
联系人:孙林
联系方式:+86-13055967557
招标代理机构:中化建国际招标有限责任公司
地址:北京市东城区东直门外小街6号海油大厦4层
联系人:王燕
联系方式:+86 010-84527979
7、汇款方式:
招标代理机构开户银行(人民币):
招标代理机构开户银行(美元):
账号(人民币):
账号(美元):
文章推荐：
浙江lng三期项目接收站工程计量橇 - 国际招标澄清或变更公告(1)
浙江lng三期项目接收站工程计量橇国际招标澄清或变更公告(1)
更多商机查看，下载保标APP
扫码关注小程序，获取商机更容易
